Top 9 High Lift Floor Jacks For Trucks & SUVs

When you are planning to lift your truck, you might realize that the floor jack that you own is very small and it will not do a good job for you due to the length of the springs of your truck and its height. You might require a large floor jack to lift your truck and it has to be of high quality and strong enough to hold the weight of your truck.

This post is to help you get to choose the best floor jacks for trucks from the various types that available in the market. You will be able to get the floor jacks with the highest quality and usability, which will be perfect to enable you to lift your truck for a long time.

The best floor jack doesn’t have to be expensive for it to be of high quality. There are various floor jacks for commercial and home use and depending on what you want to use it for, you will need to go for the right one so that it gives you the right service at the right cost.

Comparison Of High Lift Floor Jacks



1. Blackhawk Fast Lift Service Jack B6350

Blackhawk B6350 Black/Red Fast Lift Service Jack - 3.5 Ton Capacity

2.Arcan Floor Jack ALJ3T

Arcan ALJ3T Aluminum Floor Jack - 3 Ton Capacity

3.Arcan Low Profile Jack XL2T

Arcan XL2T Black Low Profile Steel Service Jack - 2 Ton Capacity

4.Pittsburgh Automotive Steel Floor Jack Low Profile

Pittsburgh Automotive 3 Ton Heavy Duty Ultra Low Profile Steel Floor Jack with Rapid Pump Quick Lift

5. Powerbuilt Triple Lift Jack – 620422E

Powerbuilt 620422E Heavy Duty 4000 lb Triple Lift Jack

6.Pro-Lift Floor Jack F-767

Pro-Lift F-767 Grey Low Profile Floor Jack - 2 Ton Capacity

7.Liftmaster High Lift Floor Trolley Jack

Liftmaster 3 Ton SUV High Lift Floor Trolley Jack Car 4x4 Van Pickup

8.Pro-Lift Hydraulic Trolley Jack Lift F-2315PE

Pro-LifT F-2315PE Grey Hydraulic Trolley Jack Car Lift with Blow Molded Case (3000 lbs Capacity)

9. Hi-Lift Jack with Off Road Base

Hi-Lift Steel Jack with Handle Keeper, Off Road Base, Lift Mate, and Mounting System Bundle

High Lift Floor Jacks Reviews 

1. Blackhawk Fast Lift Service Jack B6350

It is a floor jack which is constructed out of heavy duty steel. It is of a trolley design and has fixed wheels and rear caster style wheels. The pad, which is made of rubber, rests on the saddle and some users have experienced it jumping from the saddle when over rough surfaces.

It has a hole that is about 1 inch in diameter, which the saddle swivels in. It rapidly lifts the load and ones it senses a load, the raising is slowed. It has a two piece handle which is padded on the lower portion so there is no damaging if the handle makes contact with it.

When it is fully raised, the handle remains to stick out at a slight angle and doesn’t go completely vertical. To get to its maximum of 22 inches, it will take you 20 to 25 strokes of the handle.


  • Built-in bypass device and safety valve
  • Reasonable price
  • It lifts up to a maximum height of 22 inches.
  • It quickly lifts to load system.
  • It has rolled side plates and it is made of heavy duty steel construction.


  • The rubber saddle disc is not secured.
  • The rear caster wheels seem to be very small and thus, can get caught on small objects when it is rolling.

2.Arcan Floor Jack ALJ3T

Even though it is a 3-ton capacity floor jack, it weighs 56 pounds. Its weight lifting range is between 3.6 to 19.4 inches, which can be okay if you own a lower SUV. It is great for low profile vehicles.

It has dual pump pistons which make it possible to rise quickly, although an overload or bypass values prevent overextension of the hydraulic ram, ensuring that you are kept safe from using the jack beyond its capacity. Fuss-free maneuvering is allowed due to the swivel caster wheels and wide front wheels track and which also provide jack stability when under a load.

It has a pad on the saddle to protect the frame of the vehicle and the components. So if you are looking for toughness in a floor jack, then this thick side plates and lift arm that is reinforced is going to provide just that. Its exceptional construction allows for chassis torsion control, added strength, and durability.


  • Quick rising action.
  • Heavy duty construction.
  • Manageable weight
  • Stability under a load provided by the wide front wheels and swivel caster wheels.
  • The frame of the vehicle is protected by the saddle pad.


  • Not as long lasting
  • Poor customer service.

3.Arcan Low Profile Jack XL2T

It features a design that is low profile to enable you to get under low loads. It has a low lift height of 2 ¾ inches. Its construction is heavy duty and made from steel, meaning that, it is long lasting.

For rapid rising, it is made of a dual pump ensuring that, you get the load up as fast as possible. Precise control is provided by the universal joint release mechanism. The handle is made up of two pieces with a bumper pad.

It is a sleek, extra low profile, extra long, long lasting and durable and it is capable of taking on any job for the weekend or professionals. Its low profile designs allow users to get under whatever lift and comes at a very low price as compared to most of the other models in the market.


  • It is long, extra low profile.
  • It costs low
  • It has a very high lift range.
  • It has a rapid lift mechanism.
  • Solid steel construction.


  • Instructions not clear
  • It is not durable

4.Pittsburgh Automotive Steel Floor Jack Low Profile

It is a floor jack that is a low profile that will get the job done very fast. It is an extra low profile floor jack and high lift makes it be among the most versatile floor jacks that might be currently in the market.

It has a rapid pump that quick lift the system which rises up to 2 inches from the grounds. It has a top quality finish and at the same time, very strong. It is made from industrial quality for hardcore automotive enthusiasts and professional mechanics.

The construction is heavy duty, making it a steel welded that is very strong. The handles are knurled ensuring that you are given a sure grip and ensure that, there is no damage to your vehicle. It comes with a strong joint that is universal for enhanced control in any position. And for stability, it has extra wide steel casters.


  • Quality finish.
  • The welded construction is high quality.
  • Wide casters to make it very stable.
  • It is suitable for vehicle enthusiasts and mechanics.
  • It is a very low profile and high lift capability.


  • It leaks oil after a few weeks
  • Stops working after a few lifts

5. Powerbuilt Triple Lift Jack – 620422E

It is an affordable lift jack which is versatile and powerful. It will easily lift loads of ATVs, cars, trucks, and motorcycles. You will be able to do your work of removing and at the same time replacing vehicle transmissions.

It has a patented triple lift design which gives you the ability to remove the lift saddle and has lift rails that are padded. It is this construction of the truck which makes it be more flexible and will allow it to be used with different types of vehicle frames.

The jack is held stable by a locking safety bar which holds it in place when the vehicle is raised. It is not easy for you to experience any issues with the jack as long as you support the loaded vehicle on its stands. It has a lift capacity of 4000lbs and it is made from the construction of reliable materials.


  • It's versatility
  • It is extra safe.
  • It is durable
  • It has a patented design.
  • It is affordable in price


  • It is expensive to maintain and upkeep it.
  • It requires frequent repairs.
  • It causes some leakages at times

6.Pro-Lift Floor Jack F-767

It is a low profile floor jack which might give you better access to low ground clearance vehicle. It features a construction which is heavy duty, made from steel that will provide you with a long-term durability.

Its unique patented bypass device protects against any over pumping. It has a built-in safety valve which protects against overload. With it, you will get better access to low ground clearance. It comes fitted with a central grip that is easy to handle, which will allow you to carry it from the storage of your car using just one hand. Its low profile will allow you to use it to lift cars that have suspension setups up to 14 inches.

The lifting arm of this particular floor jack is powered by hydraulics and thus, needs to be inspected regularly to ensure that it is okay because any leaks will cause it not to work very well.


  • It has an extra low profile
  • Heavy duty steel construction.
  • It lifts up to 14 inches.
  • The built-in safety valve provides safety for overload.
  • Over pumping for safe operations patented bypass device


  • It is hard to control the valve.
  • Breaks easily after a few uses

7.Liftmaster High Lift Floor Trolley Jack

My grandfather, who owns an SUV, bought this particular trolley jack some months back and so far, it is still giving him quality service. Its body frame is pressed using the sheet of iron that is more rigid than the two-piece conventional designs.

The saddle is screwed adjustable and it fits a range of heights seamlessly. It weighs 18kgs. It is made in the USA meaning, it is a quality product that you should try out. Its 21 inches high lift means that it can lift SUVs and other big off-road vehicles.

It has been certified by the CE/ANSI for product safety and machinery safety. Its capacity is up to 3 tonnes with a lifting range of between 7.5 to 21 inches.


  • Made in the USA.
  • Can lift a load of between 7.5 inches to 21 inches
  • It has a capacity of 3 tonnes.
  • The body frame is more rigid than conventional two pieces designs.
  • The saddle is adjustable.


  • It tends to easily fail.
  • There is leakage

8.Pro-Lift Hydraulic Trolley Jack Lift F-2315PE

Its steel swivel casters enable you to position the jack wherever you need it. It has a rust-resistant steel frame which makes it possible for the jack to stay in top position with every use.

It is a hydraulic jack which has a capacity, the weight load of 3 tonnes and it can let you lift between 4.92 feet up to 11.81 feet. Its frame is made of steel and thus, rust resistant and all welded.

For mobility, its steel swivel casters make it possible for this particular floor jack. It has a handle that is very sturdy. The blow molded case makes it easy to store it after use. It meets all the ANSI and PALD 2009 requirements.


  • It comes fully assembled.
  • The case which is blow-molded gives it a hassle-free storage.
  • For mobility, it has steel swivel.
  • The frame is rust resistant steel which is all welded
  • The handle is sturdy


  • Health warning I the state of Carolina about the paint causing reproductive harm and cancer.
  • Its maximum lift height is very low

9. Hi-Lift Jack with Off Road Base 

This particular hi-lift is very strong. It works great and can be used if you have no winch and you get stuck while off road. You can also use it for other things. If you have a truck with big tires, and you find yourself going off the beaten path, you are going to find this particular jack to be strong and good for the job.

Last month, I decided to buy it for my off-road adventure use. Just yesterday, I got stuck in a mud hole and it helped with much easier to come out of the hole without having to affect my suction. The jack is still intact and my truck is unharmed.


  • It comes fully assembled.
  • The case which is blow-molded gives it a hassle-free storage.
  • For mobility, it has steel swivel.
  • The frame is rust resistant steel which is all welded
  • The handle is sturdy


  • Health warning I the state of Carolina about the paint causing reproductive harm and cancer.
  • Its maximum lift height is very low

Things You Need To know About High Lift Floor Jacks

Here is some important information you need to know before you decide if you really need to buy a floor jack or not.
It is important to learn that, the first-floor jack that could lift up vehicles came into existence in 1918. Miller falls was the first company which invented it and they were located in Miller Falls, in Massachusetts.

1. Different Types of Car Jacks

When you go to auto repair shops and muffler shops, you will find hydraulic lift jacks. They ensure that it is easy to lift up even the largest trucks. It is unimaginable for any mechanic to want to work under a vehicle if they didn’t have a steady jack to lift it up.

Even though the hydraulic jacks are huge, it is not practical to have them in the home garage because they can take up too much space in your garage and at the same time, they are expensive. With that said, you will have to use a different type of jacking for home use.

There are three main types of car jacks which you will see people using on their vehicles at home namely:

1.1.Bottle Jacks: These types of jacks are very heavy and compact. Even though they are very tiny in size, they are capable of lifting up a very large amount of weight. They use hydraulics to make them very powerful yet simple in raising the vehicle.

When you place your tire iron into the plunger in the cylinder of the jack, the hydraulic is activated and then you start pumping it up and down. When lifting a vehicle, they take less energy as compared to the scissor jack.

Apart from being powerful as compared to the scissors jacks, they are also more expensive.

1.2. Scissors Jack: You will operate it using your hand without hydraulic for lifting. They are the easiest to use. That is why you will find most car owners having them to use in changing their flat tires.

They are 100 percent mechanical jack making them be easy to lift the vehicle. Even though the process is slow, it does it efficiently. You will need to take care when using them because their base is not big to ensure that they are sturdy when jacking up your car.

1.3.Floor Jacks/Trolley Jacks: They are operated using hydraulic jacks which are very powerful and at the same time, very easy to use. The only downside of this particular jack is that they are very bulky, heavy and this makes them not to be portable.

They are best to be used in garages at home and most of them can be lifted up easily from the vehicle when doing a tire change. They can lift up to 4 tons. Their base is sturdy and thus, when you are jacking up the vehicle, you won’t have to worry as they have a longer and wider base as compared to the bottle and scissors jacks. They are the best even though the most costly amongst the three types.

2. Important Jack Accessories

It is important to know some of the important devices which will make working around your vehicle while it is jacked up safer and easier.

2.1.Jack Stands: When it comes to jacking up your vehicle, this is invaluable. You don’t have to crawl under a vehicle which has just been jacked, you need to ensure that, the jack is on a jack stand placed strategically underneath for safety reasons.

Jack stands don’t pump up and down as compared to a jack due to the fact that, they have holes in them and come with a metal key that is solid to push through the holes to lock them in place.

2.2.Wheel Brace/Tire Iron: Every vehicle seems to have this because it is a must have and you should have it too. When you buy a new vehicle, they are normally paired with a spare tire and the scissors jack.

Apart from helping in loosening the lug nuts on a vehicle, but they will also form an integral part of the jack that will work. Those that come with a vehicle are not as great as compared to those that are found in auto parts stores and ensure that it is in your truck all the time.

2.3.Wheel Chocks: When you have this one, it will enable you to keep your car which is being jacked from rolling off the jack when you are working underneath. You can keep it in your vehicle for other reasons other than jacking up your truck. You can use them in combination with your truck vehicle parking brakes to ensure that your vehicle doesn’t roll under certain conditions. Their constructions are normally made from solid rubber or a sturdy wood.

3. Uses Of Hi-Lift Floor Jacks

They are good for off-road extraction and apart from lifting your truck (more), they can do several jobs which are not related to off-road recovery which include:

  • Clamping
  • Lifting
  • Spreading
  • Winching

Things To Consider Before Buying a Floor Jack

Buying a new floor jack is very complicated and not an easy task as you might imagine. There are many things which you need to consider before making your final decision which include:

1. Price

When purchasing anything, the price is one thing you would really want to consider to know if it fits your budget or not. Jacks are available at different prices ranging from as low as less than $100 to as high as over $1000. To say the least, that is a big price swing. When it comes to jacks, quality and price do not correlate. It seems that the expensive jacks are due to their superiority in operation and due to the fact that, the lightweight material was used during its manufacture. Most of the best floor jacks are made using steel and you will find them in the lower range in terms of flooring.

2. Construction

Due to what you are going to use the jack for, you will need to get a jack that is sturdy so that it handles the tough job of lifting your truck. That is the reason why you will find most floor jacks made of metal.

You will find them made from different types of metals with aluminum being the most common one due to its lightweight yet sturdy but they are the most costly. You can get the steel which works well and it is low as far as price is concerned.

If you choose steel, you will also need to deal with the weight because they are normally very weighty and hard to move around. You will also come across jacks which are made from a combination of steel and aluminum.

3. Profile

To say the least, vehicles which have a low clearance can be very hard to jack up. If that is the case, you will need to get a jack that is as low to the ground as possible; a low profile jack. When the jack has a low profile, it will be easy for you to use it for such things as cars used for racing and other cars that are used for performance purposes and are known to be very low on the ground.

A floor jack that is low profile could also be preferred if, apart from jacking your truck, you will be jacking other things. The floor jack height profile is determined by how far the saddle of the jack is off the ground when at its lowest point.

4. Capacity

Depending on the type of job you want to use the jack for, it will determine the model of the floor jack you will purchase. Most of the floor jacks on the market are rated between 1 to 4 tons of capacity to lift.

So if you plan to use it to jack the family lawn mower, then there is no need to go for a super powerful jack. But if you are planning to jack up your truck on a more frequent basis, then it is best to get one which is powerful enough so that you will be able to handle the job in a much easier way.

5. Jack Weight

Weight of the jack may or may not necessarily be a big factor to consider when you are buying a floor jack for your truck. If you are in a race and you are buying a floor jack to help you in changing tires, then you will have to go for the lightweight aluminum type.

But if your floor jack will strictly be for home use in the garage, then you don’t have to put much consideration into its weight when you are making the purchase. Just ensure that the weight factor of the floor jack is matched with the usage so that you get the right one for your task.

6. Jack Speed

Just as much as there are a variety of floor jacks, so are they also available in different performance speed. The speed is determined by the amount of time it takes to lift a vehicle using the floor jack.

There are some floor jacks which work very fast and will be able to lift the truck as high as possible by just making a few pumps on the handle of the jack. There are also those floor jacks which you pump, but it is like they are not raising the truck as fast as you would wish.

So if you are in a race, you would need to go for a floor jack that is very fast. So depending on what you want to use the jack for, you will need to consider its speed.

7. Warranty

Most floor jacks after purchase, is used in very extreme condition and mostly yours will. You never know if you will find manufacturers defects with your floor jack and thus, need to get a floor jack that has a warranty. You will need to beware of the type of warranty that is on your floor jack

A Hi-Lift Floor Jacks vs A Bolt Jack

When you want to jack a lifted truck, a hi-lift on the trail is the best option. You can use it to change a broken axle, reseat bead, or other things which require a corner of your rig to be up in the air. The off-road base ensures that your jack is kept from sinking in the soft stuff while the lift mate allows you to lift directly at the wheel without having to maximize your suspension.

The bottle jack or factory jacks cannot do what the hi-lift jacks can because:

  • They are too short: When on the pavement, you can comfortably use a bottle jack but when you add up the taller tires and a terrain that is uneven, it will not work for you off-road. Even if you think that rock stacking will help, it is not a stable base and jacks require a stable base.
  • You will need to get under your lifted truck: It is not advisable to get under your lifted truck as it might not be safe especially with factory jacks or bottle jacks. But with the lifted jack, due to it having a stable base, you can confidently go under the truck and sort out the issue at hand – though it is risky.
  • They don’t have enough height: The maximum you can get from a bottle or factory jack can be between 8 to 10 inches. The smallest hi-lift jack will give you a minimum of 22.5 inches of travel.
  • They are hard to use in some situations: The factory or bottle jacks can be hard to use when your truck is bottled up in situations like in a mud hole. If you are not careful, the suction can break. But with a hi-lift, you can jack it on the slider or at the wheel.

Tips for Jacking Safely 

  • When using floor jacks or any other type of jacks, you will need to pay close attention when you are using it. When you are jacking up and you make a mistake, can result in serious injuries or even death.
  • You will need to think about the job over before starting the jacking and ensure that you stay on your toes when you are using whatever type of jack you are using.
  • You will have to look around the vehicle and over it or whichever object you are trying to jack up to ensure that you get your game planned for how you will do it before you embark on the job.
  • You need to make sure that you have everything that you need for jacking close by so that you don’t have to go far from where you are doing the jacking.
  •  For safety purposes, you will need to have several jacking stands.
  • You have to properly place your jack stands and locked in before you go under the vehicle.
  • Before you start the jacking your truck, ensure that the wheels are chalked because if you don’t, your truck might roll in whatever direction and fall off from the jack causing serious injuries or even death.
  • Never try to use blocks to give your jack extra lifting height unless they are very thick and solid pieces of woods. Using cinder blocks or bricks is very risky as they can crack under the weight and break apart.



Hope you enjoyed reading the article and you have been able to get an important point to consider before using a floor jack. You can get one of the best floor jacks by starting with the 8 I have reviewed here. If you don’t find what you are looking for, you can check customer reviews on Amazon and choose the best for yourself. Just ensure that what you choose works well for you. 

We will be happy to hear your thoughts

      Leave a reply